Concrete Pump
Undercon’s Hydraulic powered Peristaltic Concrete Pump runs off the hydraulic PTO source from the LHD, Brumby or even Skid Steer Loader, it can be used anywhere in the mine a machine is allowed to go.
Concrete is drawn out of the hopper into the pump tube by the vacuum that is created as the hydraulic motor drives two rollers over the pump tube fully compressing it as it rotates around the pump housing producing the same action as squeezing a tube of toothpaste. Hose pumps operate at much lower line pressures than piston pumps therefore reducing stored energy hazards.
The Concrete Pump is best run using our Wet Bag® Concrete Mix.
Features
Hose pumps are extremely simple, safe and cost-effective to operate.
The pump is rated at 15m3 per hour but a more realistic production rate – spraying Shotcrete through a 2″ delivery line is one 3m3 Concrete Mixer Kibble every 20 minutes.
Specifications
Length: | 2400mm |
Width: | 1820mm |
Tare Weight | 1780kg |
Gross Weight:: | 2450 kg |
Capacity/SWL: | 7110kg |
Gross Weight: | 2500kg |
Output Capacity: | 15m3 /hr capacity |
Hose Line Pressure: | 26 BAR |
Hydraulic Requirement: | 80/130 IPM @ 2500psi |