Wet Bag Conveyor
Specifications
ASSEMBLED FOOTPRINT | LENGTH: 5.410 m WIDTH: 2.340 m |
ASSEMBLED WEIGHT | 2022 kg |
CONVEYOR FRAME | LENGTH: 5350 mm WIDTH AT MOTOR: 1100 mm WEIGHT: 718 kg |
CONVEYOR BELT | WIDTH: 370 mm |
FORK BASE FRAME | LENGTH: 2340 mm WIDTH: 1485 mm WITH OUTRIGGERS EXTENDED: 2960 mm WEIGHT: 972 kg MAX LADEN STATIC MASS: 2800 kg MAX LIFTED MASS: 2304 kg |
WET BAG HOPPER | HEIGHT: 1585 mm WEIGHT: 332 kg |
HOPPER CAPACITY/SWL | 1,000 kg |
CALCULATED OUTPUT | PER MINUTE: 500 kg |
COMPRESSED AIR REQUIREMENT | PER MINUTE: @85psi 137 CFM |
Effortless Transfer For Optimal Mixing
Control Your Mixing
The Wet Bag Conveyor is an integral part of our Onsite Mixing System. Its unique design has been made to transfer the contents of the Wet Bag® Concrete Mix into the Concrete Mixing Kibble at a steady even flow that enhances the mixing process. The transfer process of the Wet Bag Conveyor into the Concrete Mixer Kibble takes approx. 3 minutes per Wet Bag depending on the air supply to the drive motor making our Onsite Mixing System simple and efficient.
Pneumatic Motor Power
The Wet Bag Conveyor is fitted with a top-quality FRAS conveyor system that is powered by a pneumatic motor and cast iron reduction gearbox. The Hopper bin is fitted with a Wet Bag cutter inside the Hopper, as the Wet Bag is dropped into the Hopper the base of the Wet Bag is sliced open to allow the Concrete Mix to flow onto the Belt. This action eliminates the need for workers to place their hands and arms under a suspended load to undo bag spouts.
Hands Free Operation
The bag cutter inside the Hopper ensures safe release of the Wet Bag® contents with no pinch points. The loading process is simple with The Wet Bag Hopper being a mere 1.4m high making it very accessible to lift the Wet Bags® with either a loader or crane system. A minimum roof height of 3m is required.
Transportable
For ease of use, the Wet Bag Conveyor can be easily disassembled into three sections, the Base, Hopper and Conveyor Frame for transport. The Base frame of the Wet Bag Conveyor has a large footprint to ensure the intrinsic stability and must only be set up on a solid footing. The base frame is fitted with two retractable sliding landing legs that reduce the base size for ease of transport.
Features:
- Hot Dip Galvanised Conveyor Frame, Hopper and Base Frame for long life and ease of maintenance
- FRAS conveyor belt and skirts
- Fully guarded conveyor frame reduces pinch points
- Cast iron pneumatic motor and Gearbox
- Zinc Alloy air regulator and lubricator
- Explosion proof pneumatic vibrator
- Bisalloy Steel bag cutter
- Bolted Hopper bin guard
- Fork tine pockets and rated lifting lugs
- Head Pulley Scraper
- Adjustable belt tensioner and alignment
- Adjustable Hopper exit gate